DIN Rail 3-Series Automation Processor w/infiNET EX & ER Wireless Gateway
by Crestron
Sale
$650.00
$325.00
SKU DIN-AP3MEX
This item is noncancelable and nonreturnable.
The DIN-AP3MEX is a Crestron® 3-Series Control System® designed for DIN rail mounting applications. It includes a built-in infiNET EX® & ER wireless gateway, high-speed Ethernet, Cresnet®, and BACnet™/IP support. DIN rail mounting affords a very space-efficient, cost-effective, and modular solution for configuring complete automation systems using the DIN-AP3MEX along with additional Crestron and third-party DIN rail mountable devices.
Control Engine | ||
Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs | ||
Memory | ||
DDR3 SDRAM | 256 MB | |
Flash | 4 GB | |
Memory Card | supports SD and SDHC cards up to 32 GB | |
Wired Communications | ||
Ethernet | 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [5], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client | |
Cresnet | Cresnet master mode | |
USB | Supports computer console via front panel USB 2.0 device port | |
Wireless Communications | ||
RF Transceiver | infiNET EX® & ER 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant | |
infiNET EX Range (typical) | 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities [3] | |
ER Range (typical) | 100 to 200 ft (33 to 66 m) maximum indoor, 1000 ft (305 m) outdoor, subject to site-specific conditions | |
ER Roaming | Supports roaming amongst up to 8 gateways [6] | |
Wireless Device Support | ||
infiNET EX Devices | Supports all Crestron and third-party infiNET EX devices including HR-100, HR-150, and MLX-3 handheld remotes | |
infiNET EX Expanders | Supports Crestron infiNET EX expander models CLW-EXPEX and GLA-EXPEX | |
ER "Extended Range" Devices | Supports Crestron wireless touch screen models TSR-302, TST-600, TST-602, and TST-902 [4] |
Maximum Devices Allowed [7] | |||
infiNET EX Devices*
|
infiNET EX Expanders
|
ER "Extended Range" Devices
|
|
100
|
5
|
0
|
|
90
|
5
|
1
|
|
80
|
5
|
2
|
|
70
|
5
|
3
|
|
60
|
5
|
4
|
|
50
|
5
|
5
|
|
40
|
5
|
6
|
|
30
|
5
|
7
|
|
20
|
5
|
8
|
|
10
|
5
|
9
|
|
0
|
5
|
10
|
|
*Inclusive of a maximum of six MLX-3 remotes |
Connectors & Card Slots | ||
Ground | (1) Captive screw terminal; Chassis ground lug |
|
Antenna | (1) Connection for supplied antenna | |
MEMORY | (1) SD memory card slot; Accepts one SD or SDHC card up to 32 GB for memory expansion |
|
COMPUTER | (1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only |
|
NET | (2) 4-pin 3.5 mm detachable terminal blocks, paralleled; Cresnet master port and 24 Volt DC power input |
|
LAN | (1) 8-pin RJ45 jack; 10Base-T/100Base-TX Ethernet port |
|
Controls & Indicators | ||
PWR | (1) Dual-color green/amber LED, indicates operating power supplied from Cresnet network or power supply, turns amber while booting and green when operating | |
NET | (1) Amber LED, indicates communication with the Cresnet system | |
MSG | (1) Red LED, indicates processor has generated an error message | |
HW-R | (1) Recessed miniature pushbutton for hardware reset | |
SW-R | (1) Recessed miniature pushbutton for software reset | |
ACQUIRE | (1) Recessed pushbutton with red LED, used to set up connections with wireless devices | |
ACTIVITY | (1) Red LED, indicates wireless RX and TX data activity | |
LAN | (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity | |
Power | ||
Cresnet Power Usage | 8 Watts (0.33 Amp @ 24 Volts DC) | |
Environmental | ||
Temperature | 32° to 104° F (0° to 40° C) | |
Humidity | 10% to 90% RH (non-condensing) | |
Heat Dissipation | 26 BTU/hr | |
Enclosure | ||
Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm) | ||
Dimensions | ||
Height | 3.72 in (95 mm) | |
Width | 6.28 in (160 mm) | |
Depth | 2.29 in (59 mm) |