4K DigitalMedia 8G+ Receiver & Room Controller 100
4K DigitalMedia 8G+ Receiver & Room Controller 100
4K DigitalMedia 8G+ Receiver & Room Controller 100

4K DigitalMedia 8G+ Receiver & Room Controller 100

by Crestron
Sale
$300.00
$150.00
SKU DM-RMC-4K-100-C

 This item is noncancelable and nonreturnable.

Provides a controller and interface for an HD or 4K display device as part of a complete DigitalMedia™ System. Connects to the DM 8G+® output of a DM® Switcher or Transmitter via a single CATx cable. Includes IR, RS-232, and Ethernet control ports.

 Specifications

Maximum Cable Lengths
 
 
 
Resolution		 Cable Type
DM-CBL-ULTRA
DigitalMedia™ Ultra Cable		 DM-CBL-8G
DigitalMedia 8G™ Cable		 CAT5e
(or better)[1]
1080p60 Full HD 330 ft (100 m) 330 ft (100 m) 330 ft (100 m)
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 DCI 2K
2560x1440 WQHD 230 ft (70 m) 165 ft (50 m)
2560x1600 WQXGA
3840x2160 4K UHD
4096x2160 DCI 4K
Video
  Input Signal Types DM 8G+ & HDBaseT w/Deep Color, 3D, & 4K
  Output Signal Types HDMI w/Deep Color, 3D, & 4K (DVI compatible[2])
   
Maximum Resolutions
 
Scan
Type		 Resolution Frame
Rate		 Color
Sampling		 Color
Depth
Progressive 4096x2160 DCI 4K
&
3840x2160 4K UHD		 24 Hz 4:4:4 30 bit
30 Hz 4:4:4 24 bit
30 Hz 4:2:2 36 bit
60 Hz 4:2:0 24 bit
2560x1600 WQXGA 60 Hz 4:4:4 36 bit
1920x1080 HD 1080p 60 Hz 4:4:4 36 bit
Interlaced 1920x1080 HD 1080i 30 Hz 4:4:4 36 bit
  NOTE: Common resolutions are shown; other custom resolutions are supported at pixel clock rates up to 300 MHz
Audio
  Input Signal Types DM 8G+, HDBaseT
  Output Signal Type HDMI
  Formats Dolby Digital®, Dolby Digital EX, Dolby Digital Plus, Dolby® TrueHD, Dolby Atmos®, DTS®, DTS-ES, DTS 96/24, DTS-HD High Res, DTS-HD Master Audio™, LPCM up to 8 channels
Communications
  Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP
  RS-232 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking (via control system)
  IR/Serial 1-way device control via infrared up to 1.1 MHz or serial TTL/RS-232 (0-5 Volts) up to 19.2k baud (via control system)
  DigitalMedia DM 8G+, HDCP 2.2, EDID, CEC, PoDM, Ethernet
  HDBaseT HDCP 2.2, EDID, PoE, Ethernet
  HDMI HDCP 2.2, EDID, CEC
  NOTE: Supports management of HDCP and EDID; supports management of CEC between the connected HDMI device and a control system
Connectors
  HDMI OUT (1) 19-pin Type A HDMI female;
HDMI digital video/audio output (DVI compatible[2])
  COM (1) 5-pin 3.5 mm detachable terminal block;
Bidirectional RS-232 port;
Up to 115.2k baud, hardware and software handshaking support
  IR 1 – 2 (1) 4-pin 3.5 mm detachable terminal block;
Comprises (2) IR/Serial ports;
IR output up to 1.1 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 19200 baud
  LAN (1) 8-pin RJ45 female, shielded;
10Base-T/100Base-TX Ethernet port
  Ground (1) 6-32 screw;
Chassis ground lug
  DM IN (1) 8-pin RJ45 female, shielded;
DM 8G+ input, HDBaseT compliant;
PoDM PD port (HDBaseT PoE compatible)[3,4];
Connects to the DM 8G+ output of a DM switcher, transmitter, or other DM device, or to an HDBaseT device, via CAT5e, CrestronDM-CBL-8G, or CrestronDM-CBL-ULTRAcable[1]
  24VDC 0.75A MAX (1) 2.1 x 5.5 mm DC power connector;
24 Volt DC power input;
PW-2407WUpower pack included
Controls & Indicators
  HDMI OUT (1) Green LED, indicates video signal presence at the HDMI output
  LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
  DM IN (2) LEDs, green LED indicates DM link status, amber LED indicates video and HDCP signal presence
  RESET (1) Recessed pushbutton, for hardware reset
  SETUP (1) Red LED and (1) recessed pushbutton, for Ethernet setup
  24VDC (1) Green LED, indicates operating power supplied via PoDM, HDBaseT PoE, or local power pack
Power
  Power Pack (included) Input: 100-240 Volts AC, 50/60 Hz;
Output: 0.75 Amps @ 24 Volts DC;
Model:PW-2407WU
  Power over DM (PoDM) IEEE 802.3at Type 1 Class 3 (12.95 W) compliant PoDM PD (Powered Device), capable of being powered by a PoDM PSE (Power Sourcing Equipment)[3]
  Power over HDBaseT IEEE 802.3at Type 1 Class 3 (12.95 W) compliant HDBaseT PoE PD (Powered Device), capable of being powered by an HDBaseT PoE PSE (Power Sourcing Equipment)[4]
Environmental
  Temperature 32° to 104° F (0° to 40° C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 29 BTU/hr
Enclosure
  Chassis Metal, black finish, with (2) integral mounting flanges, vented top and bottom
  Mounting Freestanding, surface mount, or attach to a single rack rail
Dimensions
  Height 6.09 in (155 mm)
  Width 5.68 in (145 mm)
  Depth 1.02 in (26 mm)
Weight
  16.5 oz (468 g)

Please contact us for any questions regarding this product.


People who bought this product, also bought