This item is nonreturnable and noncancelable.
This pair of 5" Full-Range Ceiling Loudspeakers from Tannoy includes two wide-bandwidth, high-power handling, and high-sensitivity loudspeakers built around Tannoy's CMS 3.0 Ceiling Monitor System technology. With a reduced backcan depth, the low-profile speaker has been engineered specifically for applications where ceiling cavity dimensions are a critical limiting factor. The point source configuration of the ICT driver's mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage, avoiding the significant energy losses in the vertical plane at the crossover frequency that are inherent in typical two-way designs.
The loudspeaker utilizes a 16-Ohm driver, making it ideal for use in high-performance, low-impedance systems. A low insertion-loss 30W transformer is included, with convenient front switching for taps at 30W, 15W, and 7.5W, with an additional 3.75W tap for traditional constant-voltage systems. An extra clamp extension accommodates thicker ceiling panels, and a locking design prevents inadvertent over-screwing. The magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes.
Specifications:
Tannoy CMS 503ICT LP Specs
Low Frequency Driver | 5" / 130 mm mineral-loaded polypropylene |
High Frequency Driver | ICT |
Frequency Response | 88 Hz to 50 kHz at -3 dB |
Frequency Range | 77 Hz to 24 kHz at -10 dB |
System Sensitivity | 89 dB (1 W = 4 V for 16 Ohms) |
Nominal Coverage Angle | 90° |
Power Handling | Average: 50 W Program: 100 W Peak: 200 W |
Recommended Amplifier Power | 100 W @ 16 Ohms |
Nominal Impedance | 16 Ohms |
Maximum SPL | Average: 106 dB Peak: 112 dB |
Transformer Taps | 70 V: 30 W (165 Ohms), 15 W (330 Ohms), 7.5 W (660 Ohms), 3.75 W (1320 Ohms), OFF & low impedance operation 100 V: 30 W (330 Ohms), 15 W (660 Ohms), 7.5 W (1320 Ohms), OFF & low impedance operation |
Enclosure | Back Can: Zinc-plated steel Baffle: Reflex-loaded UL 94V-0 rated ABS Grille: Steel, with weather-resistant coating |
Safety Features | Safety ring located at rear of enclosure for load bearing safety bond |
Clamping Characteristics | Security toggle clamp Clamping Range: 0.37 - 2.36" / 1 - 6 cm Recommended Clamp Torque: 1.5 Nm |
Cable Entry | Cable clamp & squeeze connector for conduit up to 0.9" / 22 mm |
Mount | Low-profile |
Connectors | Removable locking screw terminals with "loop thru" |
Compliance | UL-1480, UL-2043, CE |
Dimensions | Bezel Diameter: 10.8" / 27.4 cm Front of Ceiling to Rear of Back Can: 3.9" / 9.9 cm Hole Cutout Diameter: 10.0" / 25.3 cm |
Weight | 6.8 lb / 3.1 kg |
Please contact us for any questions regarding this product.