DIN Rail 3-Series Automation Processor w/infiNET EX & ER Wireless Gateway

Sale
$650.00
$325.00
SKU DIN-AP3MEX

This item is noncancelable and nonreturnable.

The DIN-AP3MEX is a Crestron® 3-Series Control System® designed for DIN rail mounting applications. It includes a built-in infiNET EX® & ER wireless gateway, high-speed Ethernet, Cresnet®, and BACnet™/IP support. DIN rail mounting affords a very space-efficient, cost-effective, and modular solution for configuring complete automation systems using the DIN-AP3MEX along with additional Crestron and third-party DIN rail mountable devices.

Control Engine
  Crestron 3-Series; real-time, preemptive multi-threaded/multitasking kernel; Transaction-Safe Extended FAT file system; supports up to 10 simultaneously running programs
Memory
  DDR3 SDRAM 256 MB
  Flash 4 GB
  Memory Card supports SD and SDHC cards up to 32 GB
Wired Communications
  Ethernet 10/100 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, industry-standard TCP/IP stack, UDP/IP, CIP, DHCP, SSL, TLS, SSH, SFTP (SSH File Transfer Protocol), FIPS 140-2 compliant encryption, IEEE 802.1X, SNMP, BACnet/IP [5], IPv4 or IPv6, Active Directory authentication, IIS v.6.0 Web Server, SMTP e-mail client
  Cresnet Cresnet master mode
  USB Supports computer console via front panel USB 2.0 device port
Wireless Communications
  RF Transceiver infiNET EX® & ER 2-way RF, 2.4 GHz ISM Channels 11-26 (2400 to 2483.5 MHz), default channel 15; IEEE 802.15.4 compliant
  infiNET EX Range (typical) 150 ft (46 m) indoor, 250 ft (76 m) outdoor to nearest mesh network device(s); subject to site-specific conditions and individual device capabilities [3]
  ER Range (typical) 100 to 200 ft (33 to 66 m) maximum indoor, 1000 ft (305 m) outdoor, subject to site-specific conditions
  ER Roaming Supports roaming amongst up to 8 gateways [6]
Wireless Device Support
  infiNET EX Devices Supports all Crestron and third-party infiNET EX devices including HR-100, HR-150, and MLX-3 handheld remotes
  infiNET EX Expanders Supports Crestron infiNET EX expander models CLW-EXPEX and GLA-EXPEX
  ER "Extended Range" Devices Supports Crestron wireless touch screen models TSR-302, TST-600, TST-602, and TST-902 [4]
  Maximum Devices Allowed [7]
 
infiNET EX Devices*
infiNET EX Expanders
ER "Extended Range" Devices
 
100
5
0
 
90
5
1
 
80
5
2
 
70
5
3
 
60
5
4
 
50
5
5
 
40
5
6
 
30
5
7
 
20
5
8
 
10
5
9
 
0
5
10
  *Inclusive of a maximum of six MLX-3 remotes
Connectors & Card Slots
  Ground (1) Captive screw terminal;
Chassis ground lug
  Antenna (1) Connection for supplied antenna
  MEMORY (1) SD memory card slot;
Accepts one SD or SDHC card up to 32 GB for memory expansion
  COMPUTER (1) USB Type B female;
USB 2.0 computer console port (6 ft cable included);
For setup only
  NET (2) 4-pin 3.5 mm detachable terminal blocks, paralleled;
Cresnet master port and 24 Volt DC power input
  LAN (1) 8-pin RJ45 jack;
10Base-T/100Base-TX Ethernet port
Controls & Indicators
  PWR (1) Dual-color green/amber LED, indicates operating power supplied from Cresnet network or power supply, turns amber while booting and green when operating
  NET (1) Amber LED, indicates communication with the Cresnet system
  MSG (1) Red LED, indicates processor has generated an error message
  HW-R (1) Recessed miniature pushbutton for hardware reset
  SW-R (1) Recessed miniature pushbutton for software reset
  ACQUIRE (1) Recessed pushbutton with red LED, used to set up connections with wireless devices
  ACTIVITY (1) Red LED, indicates wireless RX and TX data activity
  LAN (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Power
  Cresnet Power Usage 8 Watts (0.33 Amp @ 24 Volts DC)
Environmental
  Temperature 32° to 104° F (0° to 40° C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 26 BTU/hr
Enclosure
  Light gray polycarbonate housing with polycarbonate label overlay, UL94 V-0 rated, 35 mm DIN EN 60715 rail mount, DIN 43880 form factor for enclosures with 45 mm front panel cutout, occupies 9 DIN module spaces (162 mm)
Dimensions
  Height 3.72 in (95 mm)
  Width 6.28 in (160 mm)
  Depth 2.29 in (59 mm)

Please contact us for any questions regarding this product.


People who bought this product, also bought