DM Lite HD Scaling Auto-Switcher & HDMI over CATx Extender 300 w/Wall Plate Transmitter, White

Sale
$500.00
$250.00
SKU HD-MD-300-C-E-W

This item is noncancelable and nonreturnable.

The Crestron® HD-MD-300-C-E delivers an incredibly simple and cost-effective multimedia presentation solution for classrooms and meeting spaces. It allows a laptop or mobile device (HDMI® or VGA) to be connected at a wall plate and routes the signal to a display or projector up to 230ft (70 meters) away. An additional HDMI source can be connected at the display device location (or through an optional wall plate near the display). Fully automatic operation detects when a source is connected or disconnected at any input and turns the display on and off, alleviating the need for any control panels or remotes. Built-in scaling ensures an optimal video image for SD and HD video signals, as well as for high-resolution computer signals.

  • 2x1+1 high-definition digital AV switcher, scaler and extender
  • Fully-automatic operation - no control system, control panel or programming required
  • Easy web browser setup
  • Supports integration with a Crestron® control system for fully programmable functionality
  • Includes a wall plate transmitter and surface-mountable receiver

 

  •  Switcher Audio Input Signal Type - Stereo Audio
  •  Switcher Audio Signal Type Supported - Balanced
  •  Switcher Audio Signal Type Supported - Unbalanced
  •  Switcher Type - Audio
  •  Switcher Type - Video
  •  DC Voltage: 24 Volts
  •  Active Power: 13 Watt
  •  Color: White
  •  Operating Temperature (Maximum): 104 F
  •  Operating Temperature (Minimum): 32 F
  •  Current Draw: 1.25 Amps
  •  AC Voltage (Minimum): 100 Volts
  •  AC Voltage (Maximum): 240 Volts
  •  Video:
    •Switcher: 2x1+1 (2inputs at transmitter + 1input at receiver) auto-switching, auto-detecting multi-format digital/analog inputs; Crestron Quick Switch HD technology
    •Scaler: HD video scaler and deinterlacer, noise reduction, 3:2/2:2 pull-down detection and recovery, aspect ratio selection, VGA phase/clock and H/V position adjustments, picture and RGB color adjustments
    •Input Signal Types: HDMI with Deep Color (DVI and Dual-Mode DisplayPort compatible), VGA/RGB (RGBHV, RGBS, RGsB), component (YPbPr)
    •Output Signal Types: HDMI with Deep Color (DVI compatible)
    •Input Resolutions, HDMI, Progressive: 640x480 at 60/72/75/85Hz, 720x480 at 60Hz (480p), 720x576 at 50Hz (576p), 800x600 at 56/60/72/75/85Hz, 848x480 at 60Hz, 852x480 at 60Hz, 854x480 at 60Hz, 1024x768 at 60/70/75/85Hz, 1024x852 at 60Hz, 1024x1024 at 60Hz, 1280x720 at 50/60Hz (720p50/60), 1280x768 at 60Hz, 1280x800 at 60Hz, 1280x960 at 60Hz, 1280x1024 at 60/75/85Hz, 1360x768 at 60Hz, 1365x1024 at 60Hz, 1366x768 at 60Hz, 1400x1050 at 60Hz, 1440x900 at 60Hz, 1600x900 at 60Hz, 1600x1200 at 60Hz, 1680x1050 at 60Hz, 1920x1080 at 24/25/50/60Hz (1080p24/25/50/60), 1920x1200 at 60Hz [10], plus any other resolution up to 165MHz pixel clock
    •Input Resolutions, HDMI, interlaced: 720x480 at 30Hz (480i), 720x576 at 25Hz (576i), 1920x1080 at 25/30Hz (1080i25/30), plus any other resolution up to 165MHz pixel clock
    •Input Resolutions, RGB/VGA, Progressive: 640x480 at 60/72/75/85Hz, 720x480 at 60Hz (480p), 720x576 at 50Hz (576p), 800x600 at 56/60/72/75/85Hz, 848x480 at 60Hz, 1024x768 at 60/70/75/85Hz, 1280x720 at 50/60Hz (720p50/60), 1280x768 at 60Hz, 1280x800 at 60Hz, 1280x960 at 60Hz, 1280x1024 at 60/75/85Hz, 1360x768 at 60Hz, 1366x768 at 60Hz, 1400x1050 at 60Hz, 1440x900 at 60Hz, 1600x1200 at 60Hz, 1680x1050 at 50/60Hz, 1920x1080 at 50/60Hz (1080p50/60), 1920x1200 at 60Hz, plus any other resolution up to 165MHz pixel clock
    •Input Resolutions, Component, Progressive: 480p, 576p, 720p50, 720p60, 1080p24, 1080p30, 1080p50 (1125 lines), 1080p60
    •Input Resolutions, Component, interlaced: 480i, 576i, 1080i25 (1125 lines), 1080i30
    •Scaler Output Resolutions, HDMI, Progressive: 640x480 at 60Hz, 720x480 at 60Hz (480p), 720x576 at 50Hz (576p), 800x600 at 60Hz, 840x480 at 60Hz, 1024x768 at 60Hz, 1280x720 at 50/60Hz (720p50/60), 1280x768 at 60Hz, 1280x800 at 60Hz, 1280x960 at 60Hz, 1280x1024 at 60Hz, 1360x768 at 60Hz, 1366x768 at 60Hz, 1400x1050 at 60Hz, 1440x900 at 60Hz, 1600x900 at 60Hz, 1600x1200 at 60Hz, 1680x1050 at 60Hz, 1920x1080 at 24/50/60Hz (1080p24/50/60), 1920x1200 at 60Hz
    •Scaler Output Resolutions, HDMI, interlaced: 480i, 576i, 1080i25, 1080i30
  •  Audio:
    •Switcher: 2x1+1 (2inputs at transmitter + 1input at receiver)
    •Input Signal Types: HDMI (Dual-mode DisplayPort compatible), analog stereo
    •Output Signal Types: HDMI, analog stereo
    •Digital Formats: Dolby Digital, Dolby Digital EX, DTS, DTS-ES, DTS 96/24, LPCM up to 8 channels
    •Analog Formats: Stereo 2-channel
    •Analog-to-Digital Conversion: 24-bit 48kHz
    •Digital-to-Analog Conversion: 24-bit 48kHz
    •Lip-Sync Delay: 0 to 150ms (maximum delay time is reduced for input signals with sampling rates over 48 kHz)
    •Analog Output Volume: -80 to +20dB Level adjustment range, plus Mute
    •Analog input Performance: Frequency Response: 20Hz to 20kHz +/-0.75dB
    •S/N Ratio: >90dB, 20Hz to 20kHz A-weighted
    •THD+N: <0.006% at 1kHz
    •Stereo Separation: >80dB
    •Analog Output Performance: Frequency Response: 20Hz to 20kHz +/-0.5dB
    •S/N Ratio: >95dB, 20Hz to 20kHz A-weighted
    •THD+N: <0.005% at 1kHz
    •Stereo Separation: >80dB
  •  COMMUNICATIONS:
    •Ethernet: 10/100Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, web browser setup and control, Crestron control system integration
    •RS-232: 2-way device control and monitoring up to 115.2k baud with hardware and software handshaking
    •IR: 1-way device control via infrared up to 60 kHz
    •HDMI: HDCP 1.4, EDID, CEC
    •DM Lite Link: Proprietary link for connection between TX and RX only
  •  Connectors at Receiver:
    •HDMI, INPUT 1: (1) HDMI Type A Connector, female
    •HDMI digital video/audio input (DVI and Dual-mode DisplayPort compatible)
    •FROM TX, INPUT 2: (1) 8-pin RJ45 female, shielded
    •Link port for connection to HD-TX-201-C-2G-E transmitter
    • Maximum cable length: 230ft (70 m)
    •HDMI OUTPUT: (1) HDMI Type A connector, female
    •HDMI digital video/audio output (DVI compatible)
    •AUDIO L/R: (1) 5-pin 3.5mm detachable terminal block
    •Balanced/unbalanced stereo line-level audio output
    •Maximum Output Level: 4Vrms balanced, 2Vrms unbalanced
    •Output Impedance: 200 Ohms balanced, 100 Ohms unbalanced
    •IR: (1) 2-pin 3.5mm detachable terminal block
    •IR output control port
    •Supports IR up to 60kHz
    •COM: (1) 5-pin 3.5mm detachable terminal block
    •Bidirectional RS-232 port
    •Supports RS-232 Up to 115.2k baud with hardware and software handshaking
    •LAN: (1) 8-pin RJ45 connector female
    •10Base-T/100Base-TX Ethernet port
    •24VDC 1.25A: (1) 2.1 x 5.5mm DC power connector
    •24 Volt DC power input
    •PW-2412WU power pack included
    •SERVICE: (1) USB Type A female
    •For factory use only
  •  Connectors at Transmitter:
    •HDMI IN: (1) HDMI Type A connector, female
    •HDMI digital video/audio input
    • (DVI and Dual-mode DisplayPort compatible)
    •VGA IN: (1) HD15 female
    •RGB (VGA) or component video input
    •Formats: RGBHV, RGBS, RGsB, YPbPr
    •AUDIO in: (1) 3.5mm TRS mini phone jack
    •Unbalanced stereo line-level audio input
    •Maximum input Level: 2 Vrms
    •Input Impedance: 44k Ohms
    •LAN (Front): (1) 8-pin RJ45 connector, female
    •Passive pass-through to the rear panel LAN jack
    •SERVICE (Right Side): (1) USB Type A female
    •For factory use only
    •TO RX (Rear): (1) 8-pin RJ45 connector, female, shielded
    •Link port for connection to HD-RX-201-C-E receiver
    •24VDC 1.25A (Rear): (2) Captive screw terminals
    •Not used
    • LAN (Rear): (1) 8-pin RJ45 connector female
    •Passive pass-through to the front panel LAN jack
    •Compatible Cable Standards: CAT5e, CAT6, CAT6a
    •Low Level Contact Resistance: 100mohm maximum
    •Insulation Resistance: 500mohm minimum at 500 Volts DC
    •Dielectric Withstanding Voltage: 1000 Volts AC between contacts and shell
    •Voltage Rating: 125 Volts AC
    •Current Rating: 1.5 Amps
    •PoE Compatibility: IEEE 802.3at PoE and PoE+; Insertion Force: 22N maximum
    •Retention Force: 76N minimum
  •  Controls and indicators at Receiver:
    •FROM TX, INPUT 2: (2) LEDs, green LED indicates signal extension link status, amber LED indicates video and HDCP signal presence
    •LAN: (2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
    •PWR: (1) Bi-color green/amber LED, indicates operating power is supplied from the power pack via the 24VDCinput, turns amber while booting and green when operating
    •AUTO: (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode it enabled
    •INPUT 1 - 2: (2) Pushbuttons for manual input selection, and (2) bi-color green/amber LEDs to indicate the current active input and signal presence at each corresponding input
    •SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup
  •  Controls and indicators at Transmitter:
    •PWR: (1) Bi-color green/amber LED, indicates operating power is supplied via the link to the companion receiver, turns amber while booting and green when operating
    •HDMI in: (1) Bi-color green/amber LED to indicate if the HDMI input is selected and if a signal is present
    •VGA in: (1) Bi-color green/amber LED to indicate if the VGA input is selected and if a signal is present
    •INPUT SEL: (1) Pushbutton for manual input selection, cycles through the HDMI and VGA inputs on both the transmitter and receiver
    •AUTO: (1) Pushbutton to enable/disable auto-switching mode, and (1) green LED to indicate auto-switching mode it enabled
    •SETUP: (1) Red LED and (1) recessed pushbutton for Ethernet setup
    •LINK: (1) Green LED, indicates a link to the companion receiver
    •RESET: (1) Pushbutton for hardware reset of both the transmitter and receiver
  •  Environmental:
    •Humidity: 20% to 90% RH (non-condensing)
    •Heat Dissipation: 44.3BTU/hr
  •  Construction - Receiver:
    •Chassis: Metal, black finish, with (2) integral mounting flanges, vented sides
    •Mounting: Freestanding, surface mount or attach to a single rack rail
  •  Construction - Transmitter:
    •Chassis: Metal, black or white painted front, bare metal back, (2) metal decorator-style inserts with black or white polycarbonate label overlay
    •Mounting: Mounts in a 2-gang (or larger), 2" (50mm) deep (minimum) electrical box or plaster ring; requires a decorator style faceplate (model FP-G2 or similar)
  •  Dimensions:
    •Receiver: Height: 4.94in (126mm), Width: 7.70in (196mm), Depth: 1.11in (28mm)
    •Transmitter: Height: 4.19in (107mm), Width: 3.50in (89mm), Depth: 1.92in (49mm)

Please contact us for any questions regarding this product.


People who bought this product, also bought