This item is noncancelable and nonreturnable.
The flagship PRO2 is designed for medium to large-scale commercial and residential control applications. Six built-in COM ports, eight IR/Serial ports, eight I/O Versiports, eight isolated relays, and optional Ethernet provide the essential interface for control of numerous devices including video projectors, plasma displays, switchers, DVD players, screens, lifts, and much more. The PRO2 features a built-in power supply, with power available to support external Cresnet devices including touchpanels, keypads and expansion modules.
Specifications
| Processor | ||
| CPU | 32-bit Freescale ColdFire® Microprocessor | |
| Memory | ||
| SDRAM | 64 MB | |
| NVRAM | 256 KB | |
| Flash | 4 MB | |
| Compact Flash | expandable up to 2 GB (not included) | |
| Operating System | ||
| Real-time, preemptive multi-threaded/multitasking kernel; FAT32 file system with long names; supports SIMPL™ Windows® and SIMPL+® | ||
| Ethernet | ||
| With C2ENET-1 | 10/100BaseT, auto-negotiating, full/half duplex, static IP or DHCP/DNS, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, built-in Web server and e-mail client; supports Crestron e-Control®2 XPanel and RoomView™ applications | |
| With C2ENET-2 | All above features plus: built-in firewall, router, and network address translator (NAT) | |
| Y-Bus Connectors & Expansion Slots | ||
| 40 Mb/s parallel communications; Internal backplane for integrated control ports and Y-Bus expansion slots |
||
| COM A - F | (6) DB9 male, bidirectional RS-232/422/485 ports; Up to 115.2k baud; Hardware and software handshaking support; Ports C-F support C2N-NPA8 Network Poll Accelerator |
|
| INFRARED-SERIAL OUTPUT A - H | (8) 2-pin 3.5mm detachable terminal blocks, IR/Serial output ports; IR output up to 1.2 MHz; 1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud; Individual signal generator per port allowing simultaneous firing of all ports |
|
| I/O Versiports 1 - 8 | (1) 9-pin 3.5mm detachable terminal block comprising (8) digital input/output or analog input ports (referenced to GND); Digital Input: Rated for 0-24 Volts DC, input impedance 20k ohms, logic threshold 1.24 Volts DC; Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads; Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 20k ohms; Programmable 5 Volts, 2k ohms pull-up resistor per pin |
|
| RELAY OUTPUT 1 - 8 | (2) 8-pin 3.5mm detachable terminal blocks comprising (8) normally open, isolated relays; Rated 1 Amp, 30 Volts AC/DC; MOV arc suppression across contacts |
|
| Expansion Slots | (3) Y-Bus expansion slots; Accept all Y-Bus control cards |
|
| Z-Bus Expansion Slots | ||
| 300 Mb/s parallel communications; Backplane for Z-Bus expansion slots |
||
| Expansion Slot | (1) Z-Bus expansion slot; Accepts all Z-Bus control cards |
|
| Additional Connectors | ||
| COMPUTER | (2) DB9 female; Front and rear panel RS-232 computer console ports |
|
| NET | (1) 4-pin 5mm detachable terminal block; Cresnet port, Master/Slave selectable; Expandable via C2N-NPA8 Network Poll Accelerator |
|
| 100-250V~2.3A 50/60 Hz |
(1) IEC Socket; Mates with removable power cord, included |
|
| Ground | (1) 6-32 screw, chassis ground lug | |
| Reset Buttons | ||
| HW-R | Hardware reset (reboots the control system) | |
| SW-R | Software reset (restarts the SIMPL program) | |
| Menu Buttons | ||
| FUNCTIONS | (6) Up to 6 dynamically assigned functions based upon current menu | |
| MENU | (1) Returns the LCD display to the MAIN menu | |
| ∧, ∨ | (2) Scroll up or down through any list displayed in the LCD display | |
| BKLT | (1) Toggles through 4 levels of backlight intensity for the LCD display | |
| Refer to the Operations Guide for additional menu functions | ||
| LCD Display | ||
| (2) lines, (40) characters per line; Reverse mode (yellow and black) backlit LCD; Displays system information, configuration menus, and custom programmable user functions |
||
| LED Indicators | ||
| PWR | (1 green) Indicates AC power supplied to unit | |
| NET | (1 yellow) Indicates Cresnet bus activity | |
| MSG | (1 red) Indicates control system has generated an error message | |
| LNK A | (1 red) Indicates a valid connection on LAN port A | |
| ACT A | (1 red) Indicates activity on LAN port A | |
| LNK B | (1 red) Indicates a valid connection on LAN port B | |
| ACT B | (1 red) Indicates activity on LAN port B | |
| COM A - F (TXD, RXD, RTS, CTS) |
(24 red) Indicate activity on each respective COM port | |
| IR-SERIAL A - H | (8 red) Indicate activity on each respective IR/Serial port | |
| INPUT-OUTPUT 1 - 8 | (8 red) Indicate activity on each respective I/O Versiport | |
| RELAY 1 - 8 | (8 red) Indicate contact closure at each respective relay port | |
| SLOT 1 - 3 | (3 red) Illuminates to indicate presence of a card in the respective expansion slot; extinguishes momentarily to indicate activity | |
| Power Requirements | ||
| Main Power | 2.3 Amps, 100-250 Volts AC, 50/60 Hz | |
| Available Cresnet Power | 50 Watts (shared with control card expansion slots) | |
| Environmental | ||
| Temperature | 41° to 113°F (5° to 45°C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Enclosure | ||
| Chassis | Steel, black matte powder coat finish | |
| Faceplate | Extruded aluminum, black matte powder coat finish with polycarbonate label overlay | |
| Mounting | Freestanding or 2U 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 3.56 in (9.04 cm); 3.47 (8.81 cm) without feet |
|
| Width | 17.03 in (43.26 cm); 19.0 in (48.26 cm) with ears |
|
| Depth | 10.36 in (26.31 cm) | |
| Weight | ||
| 8.0 lb (3.62 kg) – with line cord | ||
Please contact us for any questions regarding this product