This item is nonreturnable and noncancelable.
The CMS 803DC PI is a full bandwidth 360-Watt high sensitivity loudspeaker that utilises our third generation Ceiling Monitor System technology (CMS 3.0). Thanks to an all-new proprietary 8" Dual Concentric pointsource driver with Omnimagnet technology on a Torus Ogive Waveguide, the UL certified CMS 803DC PI delivers wide and consistent broadband directivity with enhanced intelligibility – plus highly accurate and linear response.
Tannoy CMS 803DC PI Features:
- Advanced new Dual Concentric driver design utilizing Omnimagnet technology
- Torus Ogive Waveguide device for improved broadband directivity
- Improved time alignment and phase coherence, delivering even better sonic performance
- High power and high sensitivity with extended frequency response and very low distortion
- Improved LF performance for applications where genuine bottom-end is a must
- Low insertion-loss, 60 watt line transformer for a more powerful and dynamic performance
- Convenient front-tapping switch for settings
- Magnetically-adhering grille system for easy custom painting and optional Arco designer grilles for minimal architectural impact
- Three-clamp, self-aligning mounting system
- UV/weather resistant UL94V-0 ABS construction for structural integrity
- Packaged with classic grille, tile rails and C-ring for quick and easy installation and simple stocking logistics
- Five year warranty from Tannoy
Specifications:
- Frequency Response (-3dB): 47 Hz - 30 kHz
- Frequency Range (-10dB) PI fitted with back can: 41 Hz - 35 kHz
- System Sensitivity (1W @1m): 92 dB (1 W = 4 V for 16 Ohms)
- Nominal Coverage Angle: 90 degrees conical
- Power Handling:
- Average: 90W
- Program: 180W
- Peak: 360W
- Recommended Amplifier Power: 180W @ 16 Ohms
- Nominal Impedance (Lo,Z): 16 Ohms
- Rated Maximum SPL:
- Average: 112dB
- Peak: 118dB
- With THP60 - Average: 110dB
- Transformer Taps (via front rotary switch):
- 70V: 60 W (83 O) / 30 W (165 O) / 15 W (330 O) / 7.5 W (660 O) / OFF & low impedance operation
- 100V: 60 W (165 O) / 30 W (330 O) / 15 W (660 O) / OFF & low impedance operation
- Transducers:
- Dual Concentric point source driver: 1 x 200 mm (8.0”) Dual Concentric driver, using Omnimagnet technology
- Low Frequency: 44 mm (1.75”) voice coil, treated multi fiber paper pulp cone
- High Frequency: 25 mm (1.00”) PEI dome
- Physical:
- Enclosure: Backcan: Zinc plated steel
- Baffle: Reflex loaded UL 94V-0 rated ABS
- Grille: Steel, with weather resistant coating
- Safety Features: Safety ring located at rear of enclosure for load bearing safety bond
- Clamping Design: Security toggle clamp
- Pre Install (PI): Separate backcan for pre-installation
- Cable Entry Options: Cable clamp & squeeze connector for conduit up to 22 mm
- Conduit Knockouts on PI Backcan: 3 Sets of horizontal positions 19 / 22 / 28 mm (0.75” / 0.87” / 1.10”)
- Connectors: Removable locking connector with screw terminals with “loop through” facility
- Dimensions:
- Bezel diameter: 319.0 mm (12.56”)
- PI Model: Front of ceiling surface to rear of speaker unit - 125.6 mm (4.94”)
- PI Model: Front of accessory backcan bezel to top of safety loop - 168.5 mm (6.63”)
- Hole cutout diameter (all models): 295 mm (11.61”)
- Net Weight (ea): CMS 803DC PI: 4.90 kg (10.80 lbs) approx CMS 803 PI Backcan: 6 kg (13.23 lbs) approx
- Included Accessories:
- C Ring
- Tile bridge
- Paint mask
- Cutout template
- Grille
Please contact us for any questions regarding this product.