Tannoy 5 Full Range Ceiling Loudspeaker with ICT

by Tannoy

This item is nonreturnable and noncancelable. 

This pair of 5" Full-Range Ceiling Loudspeakers from Tannoy includes two wide-bandwidth, high-power handling, and high-sensitivity loudspeakers built around Tannoy's CMS 3.0 Ceiling Monitor System technology. With a reduced backcan depth, the low-profile speaker has been engineered specifically for applications where ceiling cavity dimensions are a critical limiting factor. The point source configuration of the ICT driver's mid-bass and tweeter sections ensures a wide and controlled dispersion for optimum coverage, avoiding the significant energy losses in the vertical plane at the crossover frequency that are inherent in typical two-way designs.

The loudspeaker utilizes a 16-Ohm driver, making it ideal for use in high-performance, low-impedance systems. A low insertion-loss 30W transformer is included, with convenient front switching for taps at 30W, 15W, and 7.5W, with an additional 3.75W tap for traditional constant-voltage systems. An extra clamp extension accommodates thicker ceiling panels, and a locking design prevents inadvertent over-screwing. The magnetic grille attachment enables easy removal and fitting for custom painting and tapping changes.


Tannoy CMS 503ICT LP Specs

Low Frequency Driver 5" / 130 mm mineral-loaded polypropylene
High Frequency Driver ICT
Frequency Response 88 Hz to 50 kHz at -3 dB
Frequency Range 77 Hz to 24 kHz at -10 dB
System Sensitivity 89 dB (1 W = 4 V for 16 Ohms)
Nominal Coverage Angle 90°
Power Handling Average: 50 W
Program: 100 W
Peak: 200 W
Recommended Amplifier Power 100 W @ 16 Ohms
Nominal Impedance 16 Ohms
Maximum SPL Average: 106 dB
Peak: 112 dB
Transformer Taps 70 V: 30 W (165 Ohms), 15 W (330 Ohms), 7.5 W (660 Ohms), 3.75 W (1320 Ohms), OFF & low impedance operation
100 V: 30 W (330 Ohms), 15 W (660 Ohms), 7.5 W (1320 Ohms), OFF & low impedance operation
Enclosure Back Can: Zinc-plated steel
Baffle: Reflex-loaded UL 94V-0 rated ABS
Grille: Steel, with weather-resistant coating
Safety Features Safety ring located at rear of enclosure for load bearing safety bond
Clamping Characteristics Security toggle clamp
Clamping Range: 0.37 - 2.36" / 1 - 6 cm
Recommended Clamp Torque: 1.5 Nm
Cable Entry Cable clamp & squeeze connector for conduit up to 0.9" / 22 mm
Mount Low-profile
Connectors Removable locking screw terminals with "loop thru"
Compliance UL-1480, UL-2043, CE
Dimensions Bezel Diameter: 10.8" / 27.4 cm
Front of Ceiling to Rear of Back Can: 3.9" / 9.9 cm
Hole Cutout Diameter: 10.0" / 25.3 cm
Weight 6.8 lb / 3.1 kg

Please contact us for any questions regarding this product.

People who bought this product, also bought